8T capacity with manual or air powered operation

8T Manual - Web Price £2191    8T Air Powered - Web Price £2319
(prices excluding VAT and delivery)

A manual pump or a purpose designed high output air pump provides the power to two lifting cylinders. To improve safe working, hydraulic locking is provided by 90 degree isolation valves which are locked when the desired lifting height is reached. They also provide easy visual confirmation that the jack is locked off and allows each cylinder to be operated independently.

Operation is simplicity itself. Raise the air valve lever to quickly advance lifting cylinders to load and then the air pump automatically takes over to lift the load. When the desired height is reached, close the cylinder isolation valves. To lower the load, open the isolation valves and release the 'dead man' valve on pump. When the load is off the cylinders, hold down air valve lever to quickly retract cylinders. Simple, efficient and safe.




Power Pack




8 Tonne lift (double rams) 4 Tonne per ram
20 Tonne lift (double rams) 10 Tonne per ram

Covering pit widths from 800 mm - 1200 mm. Sizes outside these dimensions are made to order.

The beam moves on four wheels, which have needle roller bearings to ensure easy movement up and down the length of the pit. Parallel wheels are fitted as standard to suit flat angle pit edges with tapered wheels as an alternative for use on RSC supporting rails. Spring loaded wheels can also be provided, these retract when the jack is under load so locking its position.

A high output air pump complete with delivery valve, pre set overpressure valve and 'dead man' release valve produces the high output flow to the cylinders. The design offers air over oil hydraulic power for advance and retract of the cylinders, this increases unloaded movement. Control is by a single air valve. Up for advance and power lift and down for retract.

The lifting stroke of the hydraulic cylinders is dependent on the depth of the lift to which the beam is fitted and the ground clearance required beneath the vehicle. The stroke typically is 150-200 mm. Top quality using chrome plated rods and the latest seal technology to ensure a long and trouble free life. Lateral movement from 180mm upwards, the maximum width dependent on beam width. Each cylinder is fitted with a safety hose burst valve and 90 degrees movement isolation valve for easy visual confirmation of its position.

Designed and manufactured in accordance with Machinery Directive 98/37/EC and engineering standard: BS EN 1494:2001 (Materials handling equipment) complies with EC requirements and is covered by a 5 year warranty. Each unit is fully tested, marked with serial number and supplied with a test certificate.

Autolift Ltd.
Swallow House, Shilton Industrial Estate, Shilton, Coventry, ENGLAND CV7 9JY
Tel: 02476 613223   Fax: 02476 619323

website: www.autolift.co.uk
  e-mail: info@autolift.co.uk