Designed to accommodate vehicles with independent front suspensions – particularly buses and coaches. This Spreader Beam also enables you to reach jacking points beyond the width of your pit.
Having a spreader beam is a legal requirement for ATF & MOT dedicated test lanes.
Pit must be a minimum of 800mm wide for rams to be able to spread far enough apart to fit the Spreader Beam on.
*JACK NOT INCLUDED*
|Dimensions||Pit must be a minimum of 800mm wide for rams to be able to spread far enough apart to fit the Spreader Beam on.
When sliders are closest to the centre the width is 660mm (centre to centre of spears).
When sliders are at their widest the width is 1270mm (centre to centre of spears).
310mm from bottom of pit angle/channel to top of dish head adapter on top of the spears on the spreader beam.
270mm from bottom of pit angle/channel to top of spears on spreader beam.
|Warranty||Designed and manufactured in accordance with Machinery Directive 98/37/EC and engineering standard: BS EN 1494:2001 (Materials handling equipment) complies with EC requirements and is covered by a 5 year warranty. Each unit is fully tested, marked with a serial number and supplied with a test certificate.|