This Spreader Beam can be used on the following jacks:

This spreader beam is designed to accommodate vehicles with independent front suspensions – particularly buses and coaches. This Spreader Beam also enables you to reach jacking points beyond the width of your pit.
Having a spreader beam is a legal requirement for ATF & MOT dedicated test lanes.

Fully closed the lifting points are 920mm apart and fully extended they are 1400mm apart.

320mm clearance required from top of jack frame to underside of vehicle.

Finance Options available - Get in touch for more details

Dealer rates are available - please contact us for more information

DimensionsPit must be a minimum of 800mm wide for rams to be able to spread far enough apart to fit the Spreader Beam on.

When sliders are closest to the centre the width is 600mm (centre to centre of spears).

When sliders are at their widest the width is 1260mm (centre to centre of spears).

320mm clearance required from bottom of angle/channel to top of dish head adapter on top of the spears on the Spreader Beam.
WarrantyDesigned and manufactured in accordance with Machinery Directive 98/37/EC and engineering standard: BS EN 1494:2001 (Materials handling equipment) complies with EC requirements and is covered by a 5 year warranty. Each unit is fully tested, marked with a serial number and supplied with a test certificate
Warranty CE HGV Logos

To enquire about the 13 Tonne Telescopic Spreader Beam for Single Ram, please enter your details in the form below.

I consent to my submitted data being collected and stored *(Required)

You can read more about what we do with the information entered into this form on our Privacy Policy page

This field is for validation purposes and should be left unchanged.